Recreation 6.1m D-Tube

Overview
Specifications
Features
Options
Gallery
Video
Reviews

Overview

Sealegs amphibious marine craft are CE compliant and United States Coast Guard compliant. Sealegs is not designed for use on public roads.

Sealegs System

Two rear marinised hydraulic wheel motors with stainless steel hubs
Land powered by 4 stroke v twin cylinder air-cooled 24hp Honda in-board engine (mounted under center console) electronic ignition, electric start
Hydraulic steering controls front wheel on land and outboard
25" X 12" all terrain rear "balloon" tyres on alloy 9" rims
Marinised hydraulic cylinders raise and lower all wheels

Specifications

Length Overall	6.13m (20ft 1")
Beam	2.25m (7ft 8")
Draft	0.41m (16")
Weight	1290kg (2844lbs) (Fueled with 115HP E-Tec outboard)
Deadrise	21 degrees
Payload	500kg (1100lbs) (6 adults) on land/sea
Recommended HP	115 E-TEC
Top Speeds	Top speed 65km/h (40mph), Land 10km/h (6mph)

Features

5mm aluminum hull (5083 Marine Grade)
Integral 80 litre (21 gal) fuel tank and gauge
Warning Horn
Anti-slip deck tread
4180lph (1100gph) Automatic bilge pump
LED Navigation lights
Stainless Steel Ski Hoop with four rod holders
Free Wheel Tow Valve
Air tight sealed Aluminium D-Tube pontoon sections
Center console with seating for 3 adults
Storage in seat locker, outboard well locker & three deck lockers
Dual Halogen headlights

Boat Options

Bait Board

Located on the stern for sutting up bait or cleaning fish. With a simple mounting hole the bait board is easy to put in place and remove for cleaning or stowing away.

Davit Lift Points

XRT - Extended Run Time

Increases the on land run time of the hydraulic drive system to 30 minutes every hour as opposed to the standard 10 minutes every hour

AWD - All Wheel Drive

An additional drive motor to the front wheel provides more traction and increases all-terrain capability when encountering beach inclines of soft sand and shell.

Power Steering

An electric hydraulic pump gives extra pressure to the steering system providing the operator with fingertip control at the steering wheel.

Back Rest

2 position, with stainless bar and upholstered roll cushion support

Fold Down Windscreen Console

Minimizes vertical clearance when nessesary for storing in confined areas.

Rugged Console

Welded handles and windscreen frame.

Lifejacket

Baltic, manual inflation through pulling a cord.

Trailer

Braked, drive-on (excl. registration & other on-road costs)

Cover Options

Bimini Canopy

Stainless steel frame, fold-down. 1250(w) x 1730(l) x 1930(h)

Canopy and Clears

A Bimini with the addition of rugged clears for maximum protection from the elements. These clears are in 3 parts so the centre can be rolled up to allow air through the cockpit

Console Cover

With a 3M prefix coating this cover provides high UV and stain protection. Constructed from a low fade vinyl this cover protecrs the consle when the boat is not in use.